It offers lightness and strength significantly superiorto conventional materials, combined with excellent processability. 200gsm and 300gsm are our most common types, both are woven from 12K continuous carbon filament, 50cm width, 50meters length is our stanard size. Other sizes are avaiable under your requirements. Based on these perfect physical performance, UD carbon fiber fabric is usually used in building reinforcement, sports, marine and so on. But our main objective customers are those doing construction reinforcement . Here are some basic steps: 1.concrete surface preparation crack repair, leak stop, get rid of the aged, loose concrete part 2.brush primer (0.2-0.4kg/m2) 3.base surface preparation( putty 1.0-1.5kg/m2) 4.brush epoxy resin on the surface(0.4-0.5kg/m2) 5.stick the carbon fiber fabric onto structure 6.saturate the fabric by brushing epoxy resin along the fabric, ensure that there is no bubble existing in the composite matrix( very crucial) 0.1-0.2kg/m2 7.if more following carbon fiber fabric layer, brush 4-6times each layer 8.FRP wrap operation is completed, however, keep the structure from any impact during the following 24hrs